299D3 XE
299D3 XE
Cat® Compact Track Loaders feature a steel embedded track and steel undercarriage components for maximum life in applications where maintenance, operator technique and underfoot conditions may not be ideally suited for a Multi Terrain Loader or Skid Steer Loader.
Book a Demo
Explore my deals
Specifications
Air Conditioning System (if equipped)
-
Air ConditioningThe air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.81 kg of refrigerant which has a CO2 equivalent of 1.158 metric tonnes.
Cab
-
ROPSISO 3471:2008
-
FOPSISO 3449:2005 Level I
Dimensions
-
Length - Track on Ground69.6 in 1767 mm
-
Overall Length - Track89.4 in 2270 mm
-
Height - Top of Cab83.6 in 2125 mm
-
Ground Clearance9.6 in 245 mm
-
Departure Angle33°
-
Maximum Dump Angle54°
-
Maximum Overall Height158.7 in 4032 mm
-
Bucket Pin Height - Carry Position7.1 in 180 mm
-
Turning Radius from Center - Coupler58.1 in 1476 mm
-
Reach - Maximum Lift/Dump33.6 in 852 mm
-
Length - Without Bucket125.5 in 3189 mm
-
Turning Radius from Center - Machine Rear74 in 1881 mm
-
Turning Radius from Center - Bucket (racked)91.1 in 2314 mm
-
Bucket Pin Reach - Maximum Lift19.4 in 493 mm
-
Clearance at Maximum Lift and Dump94.5 in 2399 mm
-
Rack Back Angle - Maximum Height81°
-
Vehicle Width (400 mm/15.7 in tracks)76 in 1931 mm
-
Bucket Pin Height - Maximum Lift126.3 in 3208 mm
-
Length - With Bucket on Ground154.7 in 3931 mm
-
Maximum Reach - With Arms Parallel to Ground51.9 in 1319 mm
-
NoteOperating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, ride control, enclosed cab with glass door, side windows, air conditioning, air ride seat, advanced display, rearview camera, 1,000 CCA battery, dual direction self level, 2036 mm (80 in) low profile bucket, 400 mm (15.7 in) tracks, triple flange front/rear idlers, no optional counterweights and manual quick coupler (unless otherwise noted).
-
Roll Back Angle25°
Engine
-
Gross Power - SAE J1995110 hp 82 kW
-
Net Power - SAE 1349106 hp 79 kW
-
Displacement232 in³ 3.8 l
-
Bore3.9 in 100 mm
-
Stroke4.7 in 120 mm
-
Net Power - ISO 9249107 hp 80 kW
-
Net Power106 hp 79 kW
-
Peak Torque - 1,500 rpm - SAE J1995276 ft·lbf 374 N·m
-
Engine ModelCat C3.8 DIT (turbo)
Hydraulic System
-
Standard Flow Mode - Loader Hydraulic Pressure3335 psi 23000 kPa
-
Note*When equipped with Cat 400 Series work tools.
-
Standard Flow Mode - Hydraulic Power - Calculated44 hp 33 kW
-
Standard Flow Mode - Loader Hydraulic Flow23 gal/min 86 l/min
-
Hydraulic Flow - XE - Hydraulic Power (calculated)94 hp 70 kW
-
Hydraulic Flow - XE - Maximum Loader Hydraulic Flow*40 gal/min 150 l/min
-
Hydraulic Flow - XE - Maximum Loader Hydraulic Pressure4061 psi 28000 kPa
Noise Level
-
Inside Cab*83 dB(A) 83 dB(A)
-
Outside Cab**104 dB(A) 104 dB(A)
-
Note (2)*The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds.
-
Note (3)**The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC.
-
Note (1)Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Operating Specifications
-
Rated Operating Capacities - 35% Tipping Load3560 lb 1620 kg
-
Ground Contact Area2184 in² 1.41 m²
-
Ground Pressure5.4 psi 37.3 kPa
-
Tipping Load10170 lb 4625 kg
-
Breakout Force - Tilt Cylinder7270 lb 3298 kg
-
Breakout Force - Lift Cylinder6162 lb 2795 kg
-
Rated Operating Capacity with Optional Counterweight5360 lb 2431 kg
-
Ground Pressure - With 450 mm/17.7 in Track4.8 psi 33 kPa
-
NoteOperating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, ride control, enclosed cab with glass door, side windows, air conditioning, air ride seat, advanced display, rearview camera, 1,000 CCA battery, dual direction self level, 2036 mm (80 in) low profile bucket, 400 mm (15.7 in) tracks, triple flange front/rear idlers, no optional counterweights and manual quick coupler (unless otherwise noted).
-
Rated Operating Capacities - 50% Tipping Load5085 lb 2315 kg
-
Ground Contact Area - With 450 mm/17.7 in Track2463 in² 1.59 m²
Power Train
-
Travel Speed - Forward or Reverse - One Speed5.2 mile/h 8.4 km/h
-
Travel Speed - Forward or Reverse - Two Speed8.4 mile/h 13.5 km/h
Service Refill Capacities
-
Cooling System4.1 gal (US) 16 l
-
Engine Crankcase3.5 gal (US) 13 l
-
Fuel Tank31.7 gal (US) 120 l
-
Hydraulic System14.5 gal (US) 55 l
-
Hydraulic Tank10.3 gal (US) 39 l
-
Diesel Exhaust Fluid (DEF) Tank5 gal (US) 19 l
Weights
-
Operating Weight11756 lb 5333 kg
-
NoteOperating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, ride control, enclosed cab with glass door, side windows, air conditioning, air ride seat, advanced display, rearview camera, 1,000 CCA battery, dual direction self level, 2036 mm (80 in) low profile bucket, 400 mm (15.7 in) tracks, triple flange front/rear idlers, no optional counterweights and manual quick coupler (unless otherwise noted).
Benefits
Quiet and Comfortable
The industry leading sealed and pressurized cab option provides the operator with a cleaner and quieter operating environment with excellent work tool visibility. Continuing the industry leading trend, the D3 Series also includes as standard, seat mounted adjustable joystick controls for operator comfort.
Maximum Performance
High performance power train provides maximum performance and production capability through the Electronic Torque Management system, standard two speed travel and an electronic hand/foot throttle with decel pedal capability.
Making Your Job Easier
Cat® “Intelligent Leveling” system provides industry leading technology, integration, and available features such as dual direction self level, work tool return to dig, and work tool positioner.
A Smooth Ride
A standard, fully independent torsion axle suspension combined with the Speed Sensitive Ride Control system improves operation on rough terrain, enabling better load retention, increased productivity and greater operator comfort.
Optimized Machine Capability
Maximize machine capability and control with the available Advanced Display, providing on-screen adjustments for implement response, hystat response and creep control. Also features multi-language functionality with customizable layouts, security system and rearview camera.
Sustainability
- The Cat® C3.8 engine meets U.S. EPA Tier 4 Final and EU Stage V emission standards.
- Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: 7% biodiesel FAME (fatty acid methyl ester). Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations” (SEBU6250) for details.
- Cat® Extended Life Coolant and long-life HYDO Advanced hydraulic fluids not only reduce downtime but help decrease the amount of fluid and filters that are replaced over the life of the machine.
- Boost productivity with Cat technologies like work tool positioner, return to dig, and Cat Smart Attachments.
- Save fuel and reduce your greenhouse gas emissions with efficiency features such as foot throttle pedal and cooling system demand fan.
Equipment Info
ELECTRICAL
12 volt Electrical System
OPERATOR ENVIRONMENT
Gauges: Fuel Level, DEF Level, Hour Meter
POWER TRAIN
Cat C3.8, Turbo Diesel Engine, Meeting Tier 4 Final and Stage V Emission Standards
OTHER
Engine Enclosure, Lockable
MANDATORY EQUIPMENT
Quick Coupler, Mechanical or Powered