Conditional Content 1
Conditional Content 2
986
986
Cat® Large Wheel Loaders set the standard for optimized productivity, minimizing downtime, enhancing operator comfort, and protecting people on your jobsite through key safety features.
Book a Demo
Explore my deals
Specifications
Air Conditioning System
-
Air ConditioningThe air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes.
Axles
-
FrontFixed
-
RearTrunnion
-
Oscillation Angle±12.5°
-
Oscillation Angle - Chain Arrangement±8.5°
Brakes
-
BrakesISO 3450:2011
Dimensions (Approximate) - High Lift Linkage
-
Ground to Top of ROPS13.5 ft 4100 mm
-
Ground to Top of Exhaust Stacks13.3 ft 4060 mm
-
Ground to Top of Hood10.7 ft 3270 mm
-
Ground to Center of Front Axle3.2 ft 978 mm
-
Ground to Fuel Tank Clearance2.3 ft 691 mm
-
Ground to Lower Hitch Clearance1.5 ft 459 mm
-
Reach - Maximum Lift7.4 ft 2248 mm
-
Clearance at Maximum Lift11.6 ft 3538 mm
-
B-Pin Height - Maximum Lift17.6 ft 5371 mm
-
Maximum Overall Height - Bucket Raised23.9 ft 7276 mm
-
Rear Axle - Centerline to Bumper10.3 ft 3132 mm
-
Wheel Base12.5 ft 3810 mm
-
Maximum Overall Length38 ft 11591 mm
-
Front Axle Centerline to Bucket Tip15.3 ft 4649 mm
-
Note<ul><li>All dimensions are approximate.</li><li>Specs are calculated with a 6.1 m³ (8.0 yd³) rock bucket.</li></ul>
Dimensions (Approximate) - Quick Coupler and 6.1 m³ (8.0 yd³) Bucket
-
Ground to Top of ROPS13.5 ft 4100 mm
-
Ground to Top of Exhaust Stacks13.3 ft 4060 mm
-
Ground to Top of Hood10.7 ft 3270 mm
-
Ground to Center of Rear Axle3.2 ft 978 mm
-
Ground to Fuel Tank Clearance2.3 ft 691 mm
-
Ground to Lower Hitch Clearance1.5 ft 459 mm
-
Reach at Maximum Lift8 ft 2437 mm
-
Clearance at Maximum Lift10.7 ft 3259 mm
-
B-Pin Height at Maximum Lift15 ft 4566 mm
-
Maximum Overall Height, Bucket Raised20.9 ft 6359 mm
-
Rear Axle Center Line to Bumper10.3 ft 3132 mm
-
Wheel Base12.5 ft 3810 mm
-
Maximum Overall Length35 ft 10671 mm
-
Front Axle Centerline to Bucket Tip12.2 ft 3729 mm
Dimensions (Approximate) - Quick Coupler and Fork
-
Ground to Top of ROPS13.5 ft 4100 mm
-
Ground to Top of Exhaust Stacks13.3 ft 4060 mm
-
Ground to Top of Hood10.7 ft 3270 mm
-
Ground to Center of Rear Axle3.2 ft 978 mm
-
Ground to Fuel Tank Clearance2.3 ft 691 mm
-
Ground to Lower Hitch Clearance1.5 ft 459 mm
-
B-Pin Height at Maximum Lift15 ft 4566 mm
-
Rear Axle Center Line to Bumper10.3 ft 3132 mm
-
Wheel Base12.5 ft 3810 mm
-
Maximum Overall Length35.4 ft 10776 mm
-
Front Axle Centerline to Bucket Tip12.6 ft 3834 mm
Dimensions (Approximate) - Standard Lift Linkage
-
Ground to Top of ROPS13.5 ft 4100 mm
-
Ground to Top of Exhaust Stacks13.3 ft 4060 mm
-
Ground to Top of Hood10.7 ft 3270 mm
-
Ground to Center of Front Axle3.2 ft 978 mm
-
Ground to Fuel Tank Clearance2.3 ft 691 mm
-
Ground to Lower Hitch Clearance1.5 ft 459 mm
-
Reach - Maximum Lift7.1 ft 2175 mm
-
Clearance at Maximum Lift10.1 ft 3079 mm
-
B-Pin Height - Maximum Lift16.1 ft 4912 mm
-
Maximum Overall Height - Bucket Raised22.4 ft 6817 mm
-
Rear Axle - Centerline to Bumper10.3 ft 3132 mm
-
Wheel Base12.5 ft 3810 mm
-
Maximum Overall Length36.6 ft 11143 mm
-
Front Axle Centerline to Bucket Tip13.8 ft 4201 mm
-
Note<ul><li>All dimensions are approximate.</li><li>Specs are calculated with a 6.1 m³ (8.0 yd³) rock bucket.</li></ul>
Engine
-
Engine ModelC15 Cat®
-
Peak Power Speed1600
-
Peak Power Speed - Gross - SAE J1995456 hp 340 kW
-
Engine Power - ISO 14396: 2002449 hp 335 kW
-
Net Power - SAE J1349:2011373 hp 278 kW
-
Rated Speed2000
-
Rated Speed - 2,000 rpm - EEC 80/1269373 hp 278 kW
-
Rated Speed - 2,000 rpm - EEC 80/1269 (DIN)378 hp 278 kW
-
Rated Speed - 2,000 rpm - ISO 9249373 hp 278 kW
-
Rated Speed - 2,000 rpm - ISO 9249 (DIN)378 hp 278 kW
-
Bore5.4 in 137 mm
-
Stroke6.75 in 171.5 mm
-
Displacement927 in² 15.2 l
-
Peak Torque - 1,200 rpm - SAE J19951778 lb/ft 2411 N·m
-
Torque Rise16%
-
EmissionsU.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards and Brazil MAR-1 emission standards, equivalent to China Nonroad Stage III, U.S. EPA Tier 3 and EU Stage IIIA
Hydraulic Cycle Times
-
Rack Back4.5 s 4.5 s
-
Raise9 s 9 s
-
Dump3.5 s 3.5 s
-
Lower5.2 s 5.2 s
-
Lower Float Down4.3 s 4.3 s
-
Total Hydraulic Cycle Time21.3 s 21.3 s
Hydraulic System - Lift/Tilt
-
Lift/Tilt System - CircuitLoad Sense
-
Lift/Tilt System - Pump2 × 110 cc variable displacement
-
Maximum Flow at 2,165 rpm123 gal/min 470 l/min
-
Relief Valve Setting - Lift/Tilt4050 psi 27900 kPa
-
Lift Cylinder - Bore7.5 in 190 mm
-
Lift Cylinder - Stroke45 in 1138 mm
-
Tilt Cylinder - Bore6.7 in 170 mm
-
Tilt Cylinder - Stroke28.4 in 722 mm
Hydraulic System - Steering
-
Steering System - CircuitLoad Sense
-
Steering System - PumpPiston, variable displacement
-
Maximum Flow at 1,400 rpm52 gal/min 200 l/min
-
Steering Cut Off Pressure4000 psi 27600 kPa
-
Total Steering Angle70°
Operating Specifications
-
Operating Weight - Standard97785 lb 44355 kg
-
Operating Weight - High Lift104005 lb 47175 kg
-
Rated Payload - Standard (Quarry Face)11 ton (US) 10 t
-
Rated Payload - Loose Material (Standard)14 ton (US) 12.7 t
-
Rated Payload - High Lift (Quarry Face)11 ton (US) 10 t
-
Rated Payload - Loose Material (High Lift)12.1 ton (US) 11 t
-
Bucket Capacity Range5-10,3 m³ (6,5-13,5 yd.³)
-
Cat Truck Match - Standard770/735/740/745
-
Cat Truck Match - High Lift772/773
Operator's Cab
-
ROPS/FOPSROPS/FOPS meet ISO 3471:2008 (ROPS) and ISO 3449:2005 Level II (FOPS)
Service Refill Capacities
-
Fuel Tank141 gal (US) 535 l
-
Fuel Tank - Short Lift127 gal (US) 481 l
-
Cooling Systems26 gal (US) 100 l
-
Crankcase9 gal (US) 34 l
-
Diesel Exhaust Fluid Tank6 gal (US) 23 l
-
Transmission20 gal (US) 75 l
-
Axle Oil - Differentials and Final Drives - Front49 gal (US) 186 l
-
Axle Oil - Differentials and Final Drives - Rear45 gal (US) 170 l
-
Hydraulic System Factory Fill87 gal (US) 330 l
-
Hydraulic System - Tank Only34 gal (US) 130 l
Sound Performance - Standard
-
Operator Sound Level (ISO 6396)72 dB(A) 72 dB(A)
-
Machine Sound Level (ISO 6395)112 dB(A) 112 dB(A)
-
Note<ul><li>The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.</li><li>Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.</li><li>The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.</li></ul>
Sound Performance - Suppression
-
Operator Sound Level (ISO 6396)72 dB(A) 72 dB(A)
-
Machine Sound Level (ISO 6395)110 dB(A) 110 dB(A)
-
Note<ul><li>The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.</li><li>Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.</li><li>The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.</li></ul>
Transmission
-
Transmission TypeCat planetary power shift
-
Forward - 15 mile/h 7.3 km/h
-
Forward - 28 mile/h 12.2 km/h
-
Direct Drive - Forward 28 mile/h 12.7 km/h
-
Direct Drive - Forward 314 mile/h 22 km/h
-
Direct Drive - Forward 424 mile/h 39 km/h
-
Reverse - 15 mile/h 7.6 km/h
-
Reverse - 28 mile/h 13.6 km/h
-
Direct Drive - Reverse 29 mile/h 14.1 km/h
-
Direct Drive - Reverse 316 mile/h 25 km/h
-
Direct Drive - Reverse 425.4 mile/h 40.8 km/h
Benefits
- The highly responsive Cat C15 engine is built and tested for maximum performance.
- Mechanically actuated Electronic Unit Injection (MEUI™) fuel system and ADEM™ A5 electronic control module manage fuel delivery for optimum performance and quick engine response.
- Available in aggregate handler configuration with 14-ton payload.
- System match efficiency up to 60-ton rigid-frame trucks.
- Best-in-class transmission for long life and consistent, smooth shifting; specifically designed for mining applications.
- Moves material more efficiently with improved power and control.
- Durable construction withstands the toughest loading conditions and multiple life cycles.
- Transmission neutralizer pedal extends service brake life and allows full power during stationary loading.
- Load sense hydraulics maximize performance, lower heat and fuel consumption.
- Advanced filtration system for extended performance and reliability of the hydraulic system.
- Up to 10% more payload per pass, higher efficiency, and improved pass match.
- Field-proven lift arms for enhanced strength, uptime, and excellent visibility.
- Load-sensing hydraulic steering with 35-degree articulation for precise positioning.
- Maximum responsiveness with Steering and Integrated Control (STIC™), combining directional, gear, and steering controls in a single joystick.
- Most advanced payload weight measuring system available.
- Performance Buckets for superior digging, higher bucket fill factors, and reduced dig times.
- Cat Advansys™ ground engaging tools (GET) protect components and reduce operating costs.
- Excellent visibility to the bucket edges and work area.
- Convenient, responsive, electro-hydraulic controls increase operator productivity.
- Best-in-class efficiency while truck loading.
- Torque converter with lock-up clutch improves travel speed, cycle times.
- Engine Idle Shutdown saves fuel from unnecessary idling. Move up to 10% more material per gallon of fuel.
- Consistent performance and efficiency with lower system heat.
- Developed to monitor, manage, and enhance your jobsite operations.
- Payload provides accurate weighing* of the materials you are loading and hauling. Payload data is displayed in real-time to improve productivity and reduce overloading.
- Detect enhances awareness of the environment around working equipment and provides alerts to help keep people and assets safe on the jobsite.
- VisionLink® wirelessly connects you to your equipment, giving you access to essential information you need to know to run your business.
- Gain valuable insight into how your machine or fleet is performing.
- Optional Advanced Productivity subscription provides comprehensive actionable information to help you manage and improve the productivity and profitability of your operations.
*Not legal for trade
- Standard stairway lighting.
- Left- and right-hand stairs with 45-degree angle.
- Rear vision camera system.
- Large front and side windows.
- Pressurized cabin with filtered and reduced sound levels.
- Up to 10% lower maintenance costs.
- Advanced filtration system for extended performance.
- Extended service intervals for fluids and filters.
- Ground level or platform access to transmission control valves.
- Grouped service points.
- Centralized, ground level grease points and remote pressure taps.
- Ground electrical service center.
- Reduced waste with maintenance-free or extended-maintenance batteries.
- Swing-out engine compartment service doors.
- Tire pressure monitoring to enhance tire life.
- Longer life, rebuildability, and high resale value.
- Electro-hydraulic controls.
- Best-in-class operator comfort and ergonomics.
- Integrated steering and transmission controls.
- Convenient, automatic, inside-the-cab implement kickouts.
- Easy-to-use soft detent controls.
- Comfort Series III seats with extra thick, contoured cushions.
- Air suspension system.
- Easy-to-reach levers and controls with six-way adjustment.
- Seat-mounted implement pod with STIC steering.
- Ergonomic switch placement and displays with large backlit switches and LED indicators.
- Two-position rocker switch activates the electro-hydraulic parking brake.
- Automatic cab temperature controls.
- Precise machine control by load-sensing hydraulic steering system.
- Fold-up STIC steer/armrest.
Block Handler
- Delivers stability and durability with an optimized counterweight for block handling applications.
- An additional hydraulic valve with the Quick Coupler allows the operator to switch work tools and immediately lock the work tool.
- Larger tilt and lift cylinders on the linkage help improve load control and ensure safe and long lasting operation.
- Ride control acts as a shock absorber, providing the operator with a smoother ride over rough terrain.
- Linkage layout designed to maximize lift capability in block handling application.
- High load stresses are absorbed by solid steel lift arms.
- Enhanced strength in key pin areas through the use of one-piece castings.
- Stress released lift arms increase durability and lengthen time to repair.
Equipment Info
NOTE
Standard and optional equipment may vary. Consult your Cat dealer for details.
ELECTRICAL
Alarm, back-up
OPERATOR ENVIRONMENT
Graphical Information Display, displays real time operating information, performs calibrations and customizes operator settings
POWER TRAIN
Cat Production Measurement ready
OTHER
Automatic bucket lift kickout/positioner
Product Brochures