Conditional Content 1
Conditional Content 2
299D3
299D3
Cat® Compact Track Loaders feature a steel embedded track and steel undercarriage components for maximum life in applications where maintenance, operator technique and underfoot conditions may not be ideally suited for a Multi Terrain Loader or Skid Steer Loader.
Book a Demo
Explore my deals
Specifications
Air Conditioning System (if equipped)
-
Air ConditioningThe air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.81 kg of refrigerant which has a CO2 equivalent of 1.158 metric tonnes.
Cab
-
ROPSISO 3471:2008
-
FOPSISO 3449:2005 Level I
Dimensions
-
Length - Track on Ground69.6 in 1767 mm
-
Overall Length - Track89.4 in 2270 mm
-
Height - Top of Cab83.6 in 2125 mm
-
Ground Clearance9.6 in 245 mm
-
Departure Angle33°
-
Maximum Dump Angle54°
-
Vehicle Width (450 mm/17.7 in tracks)78 in 1981 mm
-
Turning Radius from Center - Coupler58.1 in 1476 mm
-
Rack Back Angle - Maximum Height81°
-
Reach - Maximum Lift/Dump33.6 in 852 mm
-
Vehicle Width (400 mm/15.7 in tracks)76 in 1931 mm
-
Bucket Pin Reach - Maximum Lift19.4 in 493 mm
-
Bucket Pin Height - Carry Position7.1 in 180 mm
-
Turning Radius from Center - Bucket (racked)91.1 in 2314 mm
-
Maximum Reach - With Arms Parallel to Ground51.9 in 1319 mm
-
Length - Without Bucket125.5 in 3189 mm
-
Length - With Bucket on Ground154.7 in 3931 mm
-
Clearance at Maximum Lift and Dump94.5 in 2399 mm
-
Bucket Pin Height - Maximum Lift126.3 in 3208 mm
-
Maximum Overall Height158.7 in 4032 mm
-
Roll Back Angle25°
-
Turning Radius from Center - Machine Rear74 in 1881 mm
-
NoteOperating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, 2036 mm (80 in) low profile bucket, 400 mm (15.7 in) tracks, dual flange front idler/single flange rear idler, standard flow hydraulics, enclosed cab with glass door, side windows, heater, mechanical suspension seat, advanced display, 850 CCA battery, no optional counterweights and manual quick coupler (unless otherwise noted).
Engine
-
Gross Power - SAE J199598 hp 73 kW
-
Net Power - SAE 134995 hp 71 kW
-
Displacement232 in³ 3.8 l
-
Bore3.9 in 100 mm
-
Stroke4.7 in 120 mm
-
Net Power95 hp 71 kW
-
Net Power - ISO 924995 hp 71 kW
-
Engine ModelCat C3.8 DIT (turbo)
-
Peak Torque - 1,500 rpm - SAE J1995246 ft·lbf 334 N·m
Hydraulic System
-
Hydraulic Flow - High Flow XPS - Maximum Loader Hydraulic Pressure4061 psi 28000 kPa
-
Hydraulic Flow - Standard - Loader Hydraulic Pressure3335 psi 23000 kPa
-
Hydraulic Flow - Standard - Hydraulic Power (Calculated)44 hp 33 kW
-
Hydraulic Flow - Standard - Loader Hydraulic Flow23 gal/min 86 l/min
-
Hydraulic Flow - High Flow XPS - Maximum Loader Hydraulic Flow32 gal/min 121 l/min
-
Hydraulic Flow - High Flow XPS - Hydraulic Power (Calculated)76 hp 57 kW
Noise Level
-
Note (2)*The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds.
-
Inside Cab*83 dB(A) 83 dB(A)
-
Note (3)**The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC.
-
Note (1)Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
-
Outside Cab**104 dB(A) 104 dB(A)
Operating Specifications
-
Rated Operating Capacities - 35% Tipping Load3480 lb 1580 kg
-
Tipping Load9945 lb 4520 kg
-
Breakout Force - Tilt Cylinder7270 lb 3298 kg
-
Breakout Force - Lift Cylinder6162 lb 2795 kg
-
Rated Operating Capacity with Optional Counterweight5240 lb 2380 kg
-
Ground Contact Area - With 400 mm/15.7 in Track2184 in² 1.41 m²
-
Ground Pressure - With 400 mm/15.7 in Track5.3 psi 36.4 kPa
-
NoteOperating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, 2036 mm (80 in) low profile bucket, 400 mm (15.7 in) tracks, dual flange front idler/single flange rear idler, standard flow hydraulics, enclosed cab with glass door, side windows, heater, mechanical suspension seat, advanced display, 850 CCA battery, no optional counterweights and manual quick coupler (unless otherwise noted).
-
Rated Operating Capacities - 50% Tipping Load4970 lb 2255 kg
-
Ground Contact Area - With 450 mm/17.7 in Track2463 in² 1.59 m²
-
Ground Pressure - With 450 mm/17.7 in Track4.7 psi 32.1 kPa
Power Train
-
Travel Speed - Forward or Reverse - Two Speed8.4 mile/h 13.5 km/h
-
Travel Speed - Forward or Reverse - One Speed5.2 mile/h 8.4 km/h
Service Refill Capacities
-
Cooling System4.1 gal (US) 16 l
-
Engine Crankcase3.5 gal (US) 13 l
-
Fuel Tank31.7 gal (US) 120 l
-
Hydraulic System14.5 gal (US) 55 l
-
Hydraulic Tank10.3 gal (US) 39 l
-
Diesel Exhaust Fluid (DEF) Tank5 gal (US) 19 l
Weights
-
Operating Weight11464 lb 5200 kg
-
NoteOperating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, 2036 mm (80 in) low profile bucket, 400 mm (15.7 in) tracks, dual flange front idler/single flange rear idler, standard flow hydraulics, enclosed cab with glass door, side windows, heater, mechanical suspension seat, advanced display, 850 CCA battery, no optional counterweights and manual quick coupler (unless otherwise noted).
Benefits
Quiet and Comfortable
The industry leading sealed and pressurized cab option provides the operator with a cleaner and quieter operating environment with excellent work tool visibility. Continuing the industry leading trend, the D3 Series also includes as standard, seat mounted adjustable joystick controls for operator comfort.
Maximum Performance
High performance power train provides maximum performance and production capability through the Electronic Torque Management system, standard two speed travel and an electronic hand/foot throttle with decel pedal capability.
Making Your Job Easier
Cat® “Intelligent Leveling” system provides industry leading technology, integration, and available features such as dual direction self level, work tool return to dig, and work tool positioner.
A Smooth Ride
A standard, fully independent torsion axle suspension combined with the optional Speed Sensitive Ride Control system improves operation on rough terrain, enabling better load retention, increased productivity and greater operator comfort.
Optimized Machine Capability
Maximize machine capability and control with the available Advanced Display, providing on-screen adjustments for implement response, hystat response and creep control. Also features multi-language functionality with customizable layouts, security system and rearview camera.
Sustainability
- The Cat® C3.8 engine meets U.S. EPA Tier 4 Final and EU Stage V emission standards.
- Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: 7% biodiesel FAME (fatty acid methyl ester). Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations” (SEBU6250) for details.
- Cat® Extended Life Coolant and long-life HYDO Advanced hydraulic fluids not only reduce downtime but help decrease the amount of fluid and filters that are replaced over the life of the machine.
- Boost productivity with Cat technologies like work tool positioner, return to dig, and Cat Smart Attachments.
- Save fuel and reduce your greenhouse gas emissions with efficiency features such as foot throttle pedal and cooling system demand fan.
Equipment Info
ELECTRICAL
12 volt Electrical System
OPERATOR ENVIRONMENT
Gauges: Fuel Level, DEF Level, Hour Meter
POWER TRAIN
Cat C3.8, Turbo Diesel Engine, Meeting Tier 4 Final and Stage V Emission Standards
OTHER
Engine Enclosure, Lockable
MANDATORY EQUIPMENT
Hydraulics, Standard or High Flow XPS