Skip to main content
loading site..
Conditional Content 1
Conditional Content 2

239D3

239D3

Cat® Compact Track Loaders feature a steel embedded track and steel undercarriage components for maximum life in applications where maintenance, operator technique and underfoot conditions may not be ideally suited for a Multi Terrain Loader or Skid Steer Loader.

Book a Demo
Explore my deals
Specifications
Air Conditioning System (if equipped)
  • Air Conditioning
    The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.81 kg of refrigerant which has a CO2 equivalent of 1.158 metric tonnes.
Cab
  • ROPS
    ISO 3471:2008
  • FOPS
    ISO 3449:2005 Level I
Dimensions
  • Vehicle Width (320 mm/12.6 in tracks)
    66 in 1676 mm
  • Ground Clearance
    7.7 in 195 mm
  • Length - With Bucket on Ground
    127.3 in 3234 mm
  • Length - Without Bucket
    99.3 in 2522 mm
  • Maximum Reach - With Arms Parallel to Ground
    53.4 in 1356 mm
  • Turning Radius from Center - Bucket
    81.5 in 2069 mm
  • Overall Length - Track
    71.2 in 1808 mm
  • Reach - Maximum Lift/Dump
    22.2 in 563 mm
  • Vehicle Width (400 mm/15.7 in tracks)
    69.1 in 1756 mm
  • Maximum Overall Height
    143.5 in 3645 mm
  • Bucket Pin Height - Carry Position
    8.6 in 218 mm
  • Length - Track on Ground
    54.5 in 1384 mm
  • Clearance at Maximum Lift and Dump
    81 in 2057 mm
  • Bucket Pin Height - Maximum Lift
    111.2 in 2825 mm
  • Departure Angle
    34.5°
  • Rack Back Angle - Maximum Height
    85.5°
  • Turning Radius from Center - Coupler
    45.6 in 1159 mm
  • Note
    Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, 1730 mm (68 in) low profile bucket, 320 mm (12.6 in) tracks, standard flow hydraulics, C1 cab (OROPS, mechanical seat), 850 CCA battery, manual quick coupler, no self level and no optional counterweights (unless otherwise noted).
  • Height - Top of Cab
    80.1 in 2034 mm
  • Maximum Dump Angle
    50.3°
  • Turning Radius from Center - Machine Rear
    57.4 in 1458 mm
Engine
  • Gross Power - SAE J1995
    67.1 hp 50.1 kW
  • Displacement
    134.3 in³ 2.2 l
  • Bore
    3.3 in 84 mm
  • Stroke
    3.9 in 100 mm
  • Peak Torque - 1,500 rpm - SAE J1995
    153 ft·lbf 208 N·m
  • Net Power - SAE 1349
    65.8 hp 49.1 kW
  • Net Power - ISO 9249
    66.5 hp 49.6 kW
  • Engine Model
    Cat C2.2 CRDI
  • Net Power
    65.8 hp 49.1 kW
Hydraulic System
  • Hydraulic Flow - High Flow - Loader Hydraulic Flow
    26 gal/min 99 l/min
  • Hydraulic Flow - Standard - Loader Hydraulic Pressure
    3336 psi 23000 kPa
  • Hydraulic Flow - Standard - Loader Hydraulic Flow
    18 gal/min 69 l/min
  • Hydraulic Flow - High Flow - Loader Hydraulic Pressure
    3336 psi 23000 kPa
  • Hydraulic Flow - High Flow - Hydraulic Power (Calculated)
    50.9 hp 38 kW
  • Hydraulic Flow - Standard - Hydraulic Power (Calculated)
    35.5 hp 26.5 kW
Noise Level
  • Note (2)
    **The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds.
  • Outside Cab***
    103 dB(A) 103 dB(A)
  • Note (3)
    ***The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC.
  • Note (1)
    Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
  • Inside Cab**
    83 dB(A) 83 dB(A)
Operating Specifications
  • Rated Operating Capacities - 35% Tipping Load
    1530 lb 695 kg
  • Tipping Load
    4370 lb 1985 kg
  • Breakout Force - Tilt Cylinder
    3913 lb 1775 kg
  • Rated Operating Capacity with Optional Counterweight
    2400 lb 1090 kg
  • Ground Contact Area - With 320 mm/12.6 in Track
    1373 in² 0.89 m²
  • Ground Pressure - With 320 mm/12.6 in Track
    5.4 psi 37.3 kPa
  • Note
    Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, 1730 mm (68 in) low profile bucket, 320 mm (12.6 in) tracks, standard flow hydraulics, C1 cab (OROPS, mechanical seat), 850 CCA battery, manual quick coupler, no self level and no optional counterweights (unless otherwise noted).
  • Ground Contact Area - With 400 mm/15.7 in Track
    1716 in² 1.11 m²
  • Ground Pressure - With 400 mm/15.7 in Track
    4.4 psi 30.6 kPa
  • Rated Operating Capacities - 50% Tipping Load
    2185 lb 995 kg
Power Train
  • Travel Speed - Forward or Reverse - Two Speed
    7.6 mile/h 12.2 km/h
  • Travel Speed - Forward or Reverse - One Speed
    5 mile/h 8.1 km/h
Service Refill Capacities
  • Cooling System
    3.2 gal (US) 12 l
  • Engine Crankcase
    2.6 gal (US) 10 l
  • Fuel Tank
    15.1 gal (US) 57 l
  • Hydraulic System
    11.9 gal (US) 45 l
  • Hydraulic Tank
    9 gal (US) 34 l
Weights
  • Operating Weight
    7434 lb 3372 kg
  • Note
    Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, 1730 mm (68 in) low profile bucket, 320 mm (12.6 in) tracks, standard flow hydraulics, C1 cab (OROPS, mechanical seat), 850 CCA battery, manual quick coupler, no self level and no optional counterweights (unless otherwise noted).
Benefits

Quiet and Comfortable

The industry leading sealed and pressurized cab option provides the operator with a cleaner and quieter operating environment with excellent work tool visibility. Continuing the industry leading trend, the D3 Series also includes as standard, seat mounted adjustable joystick controls for operator comfort.

Maximum Performance

High performance power train provides maximum performance and production capability through the Electronic Torque Management system, standard two speed travel and an electronic hand/foot throttle with decel pedal capability.

Making Your Job Easier

Cat® “Intelligent Leveling” system provides industry leading technology, integration, and available features such as dual direction self level, work tool return to dig, and work tool positioner.

A Smooth Ride

A standard, fully independent torsion axle suspension combined with the optional Speed Sensitive Ride Control system improves operation on rough terrain, enabling better load retention, increased productivity and greater operator comfort.

Optimized Machine Capability

Maximize machine capability and control with the available Advanced Display, providing on-screen adjustments for implement response, hystat response and creep control. Also features multi-language functionality with customizable layouts, security system and rearview camera.

Sustainability

  • The Cat® C2.2 engine meets U.S. EPA Tier 4 Final and EU Stage V emission standards.
  • Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: 20% biodiesel FAME (fatty acid methyl ester). Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations” (SEBU6250) for details.
  • Cat® Extended Life Coolant and long-life HYDO Advanced hydraulic fluids not only reduce downtime but help decrease the amount of fluid and filters that are replaced over the life of the machine.
  • Boost productivity with Cat technologies like work tool positioner, return to dig, and Cat Smart Attachments.
  • Save fuel and reduce your greenhouse gas emissions with efficiency features such as foot throttle pedal and cooling system demand fan.
Equipment Info

ELECTRICAL

12 volt Electrical System

OPERATOR ENVIRONMENT

Gauges: Fuel Level, Hour Meter

POWER TRAIN

Cat C2.2, Turbo Diesel Engine, Meeting Tier 4 Final and Stage V emission standards

OTHER

Engine Enclosure, Lockable

MANDATORY EQUIPMENT

Hydraulics, Standard or High Flow