Conditional Content 1
Conditional Content 2
621
621
The Open Bowl Wheel Tractor-Scraper is available as a self-loading, push loaded or push loaded hauling system with a broad material appetite.
Book a Demo
Explore my deals
Specifications
Cab
-
Exterior Sound LevelThe exterior sound power level for the standard machine (ISO 6393:2008) is 118 dB(A).
-
ROPS/FOPSMeets SAE and ISO standards
Dimensions
-
Width - Overall Machine141.1 in 3585 mm
-
Width - Tractor133.1 in 3381 mm
-
Width - Inside of Bowl120 in 3048 mm
-
Width - Outside Rear Tires128.9 in 3275 mm
-
Height - Overall Shipping158.6 in 4029 mm
-
Height - Top of Cab142.2 in 3612 mm
-
Ground Clearance - Tractor21.9 in 557 mm
-
Front of Tractor to Front Axle122.8 in 3119 mm
-
Axle to Vertical Hitch Pin21.3 in 540 mm
-
Height - Scraper Blade Maximum20.5 in 520 mm
-
Wheel Base314.9 in 7998 mm
-
Rear Axle - Rear of Machine114.1 in 2898 mm
-
Length - Overall Machine - Standard551.8 in 14015 mm
-
Length - Maximum (Push-Pull)613.2 in 15576 mm
-
Width - Overall Machine - Ladder Down149.2 in 3790 mm
-
Width - Rear Tire Centers90.2 in 2290 mm
Engine
-
Engine Model - TractorCat C13
-
Flywheel Power - Tractor407 hp 304 kW
-
NoteCat C13 engine meets U.S. Environmental Protection Agency (EPA) Tier 4 Final/EU Stage IV engine emission standards.
-
Rated Engine RPM - Tractor2000 r/min 2000 r/min
General
-
Overall Shipping Height13.22 ft 4.03 m
-
Overall Width11.75 ft 3.58 m
-
Scraper Capacity - Heaped24 yd³ 18.4 m³
-
Fuel Tank Refill Capacity - Scraper216.1 gal (US) 818 l
-
Tires - Scraper33.25R29**E3
-
Width - Cut10.3 ft 3.14 m
-
Maximum Depth of Spread21.3 in 540 mm
-
Top Speed - Loaded33.5 mile/h 53.9 km/h
-
Rated Load26 127 kg (57,610 lb); 26.19 tonnes (28.81 tons)
-
180° Curb-to-Curb Turning Width38.71 ft 11.8 m
-
Scraper Capacity - Struck17.1 yd³ 13 m³
-
Maximum Depth of Cut12.4 in 315 mm
-
Tires - Tractor Drive33.25R29**E3
Implement Cycle Times
-
Apron Raise2.95 s 2.95 s
-
Bowl Raise3 s 3 s
-
Ejector Retract6.7 s 6.7 s
-
Bowl Lower3.5 s 3.5 s
-
Apron Lower3.8 s 3.8 s
-
Ejector Extend5.2 s 5.2 s
-
Bail Lower3.2 s 3.2 s
-
Bail Raise1.8 s 1.8 s
Non Push-Pull
-
Operating Weight - Empty79787 lb 36185 kg
-
Overall Length45.9 ft 14.02 m
Push-Pull
-
Overall Length - With Bail Down51.1 ft 15.58 m
-
Operating Weight - Empty80630 lb 36567 kg
Safety Criteria Compliance Standards
-
Rollover Protection Structure (ROPS)ISO 3471:2008 for up to 17 084 kg (37,664 lb)
-
BrakesISO 3450:1996
-
Reverse AlarmISO 9533:2010
-
Falling Object Protective Structure (FOPS)ISO 3449:2005 Level II
-
Seat BeltSAE J386:JUN1985
-
Steering SystemISO 5010:2007
Scraper Bowl
-
Scraper Capacity - Heaped24 yd³ 18.4 m³
Service Refill Capacities
-
Hydraulic System21.926 gal (US) 83 l
-
Crankcase8.08 gal (US) 30.58 l
-
Transmission System24.76 gal (US) 93 l
-
Cooling System11.89 gal (US) 45 l
-
Fuel Tank216.09 gal (US) 818 l
-
Diesel Exhaust Fluid8.057 gal (US) 30.5 l
Tractor Engine
-
Flywheel Power - Tractor/Scraper304 kW (407 hp)
Transmission
-
Top Speed - Loaded33.5 mile/h 53.9 km/h
Travel Speeds - Runout
-
Transmission Gear - Seventh24.8 mile/h 39.9 km/h
-
Transmission Gear - Fifth13.6 mile/h 21.9 km/h
-
Transmission Gear - First3.1 mile/h 5 km/h
-
Transmission Gear - Sixth18.4 mile/h 29.6 km/h
-
Transmission Gear - Second5.5 mile/h 8.9 km/h
-
Transmission Gear - Third7.5 mile/h 12.1 km/h
-
Transmission Gear - Fourth10.1 mile/h 16.3 km/h
-
Transmission Gear - Eighth33.5 mile/h 53.9 km/h
-
Transmission Gear - Reverse5.7 mile/h 9.2 km/h
Benefits
BE MORE PRODUCTIVE
- Up to 8% improvement in productivity.
- Advanced Productivity Electronic Control System (APECS) allows
the engine and transmission to communicate on a high level. This communication allows the machine to better utilize the power
and torque the engine is producing. The net result is moving more
material. - Use Ground Speed Control to set the desired top speed and the
machine will find the gear that works best for the engine and the
transmission, providing a lower fuel burn. - The Machine Speed Limit feature replaces Top Gear Selection.
- Auto-Stall assists in quickly bringing the transmission to an
operating temperature at start-up when the machine is working in a
cold climate region. - Boost productivity with the Payload Estimator feature (optional
attachment). Payload Estimator is an automatic feature when
ordered with Sequence Assist. - Cat®Payload Estimator for scrapers is an earthmoving solution for
optimal payload and jobsite efficiency. Payload Estimator achieves on-the-go weighing by using bowl lift cylinder pressure during the
loaded haul segment. Payload Estimator is optimized to be used
with Sequence Assist, which provides increased productivity with
less operator effort.
WORK IN COMFORT
- Reduce up to 14 individual operator commands per cycle with Sequence Assist (optional attachment).
- Steer with less effort using the newly designed high-pressure
steering system. - Enjoy interior improvements and a more ergonomic work environment
with a 21% larger cab than the G Series cab. - Intuitive, ergonomic controls keep operators focused on their work.
- Maintain desired cab temperature with automatic temperature
control.
DESIGNED FOR SAFETY
- Get in and out of the cab easier with the new powered access
ladder system (optional attachment). - Enhance an operator’s awareness of site surroundings with the
optional Work Area Vision System (WAVS). - Seat belt indicator provides visual and audible alerts when the seat
belt is not in use. - Advanced Cushion Hitch allows the cushion hitch to prevent end
stroke by having the ability to predict end stroke events and manage
the rate of dampening, resulting in reduced hitch maintenance and
improved operator ride in rough conditions.
EASY TO OPERATE
- The spacious cab features easy, intuitive controls and excellent
visibility. The cab provides a comfortable working environment for
all-day operation. - Cat Advanced Ride Management (ARM) seat suspension reduces
end stroke movement of the load cylinder for a smoother ride. - Engine overspeed protection will automatically engage with no
operator input when the machine is in eighth gear. The machine
will assist in slowing the machine speed by canceling the throttle
command and engaging the engine compression brake.
INTEGRATED CAT TECHNOLOGIES
- Monitor, manage, and enhance jobsite operations.
- Hit target grade faster and more accurately with Cat GRADE technologies. Finish jobs in fewer passes and with less operator effort, saving you time and helping to increase profit.
- Product Link™ collects machine data that can be viewed online through web and mobile applications (optional attachment).
- Access information anytime, anywhere with Vision Link®– use it to make informed decisions that boost productivity, lower costs, simplify maintenance, and improve safety and security on your jobsite.
- Shorten the learning curve for inexperienced operators with Load Assist (optional attachment).
EXECUTE EFFICIENCY
- The new tractor hydraulic on-demand fan helps assist in lower fuel consumption.
- The Cat C13 tractor engine meets U.S. EPA Tier 4 Final or EU Stage V emission standards, contributing to lower fuel consumption.
- Using draft-arm overflow guards diverts material away from the bowl, preventing material from getting caught between the draft arms and the bowl sides.
- Cat Grade Control (optional attachment) intelligently ensures the machine does not cut below grade in a cut area or overfill in the fill area.
Equipment Info
NOTE
Standard and optional equipment may vary. Consult your Cat dealer for details.
POWER TRAIN - TRACTOR
Cat C13 engine with MEUI™
POWER TRAIN - SCRAPER
Braking system: - Primary and secondary, wet disc, hydraulic
ELECTRICAL - TRACTOR
Alternator, 150 Amp
ELECTRICAL - SCRAPER
Alarm, backup
OPERATOR ENVIRONMENT - TRACTOR
HVAC system, heat, AC, defrost
FLUIDS
Extended Life Coolant to -37° C (-34° F)
OTHER STANDARD EQUIPMENT - TRACTOR
Advanced cushion hitch
OTHER STANDARD EQUIPMENT - SCRAPER
Bowl: - 18.4 m3 (24 yd3), heaped - 14.1 m3 (18.4 yd3), struck
Product Brochures
