Skip to main content
loading site..
Conditional Content 1
Conditional Content 2

651

651

The Open Bowl Wheel Tractor-Scraper is available as a self-loading, push loaded or push loaded hauling system with a broad material appetite.

Book a Demo
Explore my deals
Specifications
Dimensions
  • Width - Overall Machine
    14.3 ft 4.36 m
  • Width - Tractor
    12.3 ft 3.75 m
  • Width - Rear Tire Center Lines
    9.21 ft 2.81 m
  • Width - Inside of Bowl
    12.07 ft 3.68 m
  • Width - Outside Bowl - Shipping Width
    12.98 ft 3.93 m
  • Height - Overall Shipping
    15.29 ft 4.66 m
  • Height - Top of Cab
    12.86 ft 3.92 m
  • Ground Clearance - Tractor
    2.3 ft 0.7 m
  • Front of Tractor to Front Axle
    14.93 ft 4.55 m
  • Axle to Vertical Hitch Pin
    1.8 ft 0.55 m
  • Height - Scraper Blade Maximum
    2.17 ft 0.66 m
  • Wheel Base
    32.68 ft 9.96 m
  • Length - Overall Machine
    58.96 ft 17.97 m
  • Rear Axle - Rear of Machine
    8.07 ft 2.46 m
Engine
  • Tractor Engine
    Cat C18
Hydraulics
  • Bowl Cylinder Bore
    7.08 in 180 mm
  • Bowl Cylinder Stroke
    37.4 in 950 mm
  • Apron Cylinder Bore
    7.08 in 180 mm
  • Apron Cylinder Stroke
    29.92 in 759.5 mm
  • Steering Circuit (@ High Idle)
    76.08 gal/min 288 l/min
  • Cushion Hitch Circuit
    19.54 gal/min 74 l/min
  • Secondary Steering Circuit
    14.52 gal/hr 55 l/hr
  • Relief Valve - Steering Circuit
    1959 psi 13500 kPa
  • Relief Valve - Implement Circuit
    1999 psi 13780 kPa
  • Compensator Settings - Cushion Hitch Circuit
    3002 psi 20700 kPa
Scraper Bowl
  • Scraper Capacity - Heaped
    44 yd³ 33.6 m³
  • Rated Load
    104058 lb 47200 kg
  • Capacity - Struck
    32 yd³ 24.5 m³
  • Depth of Cut - Maximum
    17.3 in 417 mm
  • Width - Cut - To Router Bits
    12.5 ft 3.8 m
  • Ground Clearance - Maximum
    2.3 ft 0.7 m
  • Hyd. Penetration Force - 657G
    121000 lb 542 kN
  • Depth of Spread - Maximum
    26 in 530 mm
  • Apron Opening
    92 in 2337 mm
  • Apron Closure Force
    39200 lb 176 kN
Service Refill Capacities - Scraper
  • Fuel Tank
    430 gal (US) 1628 l
  • Differential
    44 gal (US) 168 l
  • Final Drive - Each
    7.8 gal (US) 30 l
  • Transmission
    31.9 gal (US) 121 l
  • Crankcase
    8.9 gal (US) 34 l
  • Cooling System
    16.6 gal (US) 63.2 l
Service Refill Capacities - Tractor
  • Crankcase
    13.7 gal (US) 38 l
  • Transmission
    35.9 gal (US) 136 l
  • Differential
    36 gal (US) 136 l
  • Final Drive - Each
    6 gal (US) 29.5 l
  • Cooling System
    23.4 gal (US) 88.6 l
  • Hydraulic Reservoir
    39.6 gal (US) 150 l
  • Windshield Washer
    0.5 gal (US) 5 l
Steering
  • Width - 180° Turn - Right
    44.6 ft 13.6 m
  • Width - 180° Turn - Left
    47.57 ft 14.5 m
  • Steering Angle - Right
    90
  • Steering Angle - Left
    85
Tractor Engine
  • Flywheel Power - Tractor/Scraper
    469kW (629 hp)
  • Net Power
    469 kW/637 hp
  • Gross Power (SAE J1995)
    637 hp 475 kW
  • Net Power (ISO 14396)
    585 hp 436 kW
  • Net Power (SAE J1349/ISO 9249)
    592 hp 436 kW
  • Bore
    5.7 in 145 mm
  • Stroke
    7.2 in 183 mm
  • Displacement
    1105 in³ 18.1 l
Transmission
  • Top Speed - Loaded
    34.9 mile/h 56.1 km/h
  • 1 Forward
    3.5 mile/h 5.7 km/h
  • 2 Forward
    6.5 mile/h 10.5 km/h
  • 3 Forward
    7.8 mile/h 12.5 km/h
  • 4 Forward
    10.6 mile/h 17 km/h
  • 5 Forward
    14.2 mile/h 22.8 km/h
  • 6 Forward
    19.2 mile/h 30.9 km/h
  • 7 Forward
    25.7 mile/h 41.4 km/h
  • 8 Forward
    34.9 mile/h 56.1 km/h
  • Reverse
    6.7 mile/h 10.8 km/h
Weights - Push-Pull
  • Total Shipping
    160505 lb 72804 kg
  • Tractor Shipping
    93635 lb 42472 kg
  • Scraper Shipping
    64068 lb 29061 kg
  • Total Operating - Empty
    164244 lb 74500 kg
  • Front Axle
    93842 lb 42566 kg
  • Rear Axle
    66663 lb 30238 kg
  • Total Operating - Loaded
    268302 lb 121700 kg
  • Front Axle - Loaded
    134165 lb 60856 kg
  • Rear Axle - Loaded
    130340 lb 59121 kg
Benefits

BE MORE PRODUCTIVE

  • Move more material with Advanced Productivity Electronic ControlSystem (APECS), which allows the machine to better utilize engine power and torque.
  • Set the desired top speed with Ground Speed Control, and the machine will find the gear that works best for the engine and the transmission, providing a lower fuel burn in speed reduced areas.
  • The Machine Speed Limit feature replaces Top Gear Selection.
  • Auto-Stall assists in quickly bringing the transmission to an operating temperature at start-up when working in colder climates.
  • Cat Payload Estimator for scrapers achieves on-the-go weighing to deliver optimal payload and jobsite efficiency.

WORK IN COMFORT

  • Steer with less effort with the newly designed high-pressure steering system.
  • Reduce up to 14 individual operator commands per cycle with
    Sequence Assist (optional attachment).
  • Enjoy interior improvements and a more ergonomic work
    environment.
  • Intuitive, ergonomic controls with multifunction display keep
    operators focused on their work.
  • Maintain desired cab temperature with automatic temperature
    control.

DESIGNED FOR SAFETY

  • Get in and out of the cab easier with the new powered access
    ladder system.
  • Enhance the operator’s awareness of site surroundings with the
    optional Work Area Vision System (WAVS).
  • Ground-level access to fuel fill and several maintenance points for
    easier and safer service.
  • Seat belt indicator provides visual and audible alerts when the seat
    belt is not in use.Wide brake shoes and brake drums improve brake performance and reduce brake and drum wear
  • Separate front and rear circuits. Secondary brakes engage automatically if service pressure drops
  • Parking Brake features a spring-applied, hydraulic pressure released mechanism that operates the service brakes

EASY TO OPERATE

  • Cat Advanced Ride Management (ARM) seat suspension reduces end stroke movement of the load cylinder for a smoother ride.
  • Engine overspeed protection will automatically engage with no operator input when the machine is in eighth gear. The machine will assist in slowing the machine speed by canceling the throttle command and engaging the engine compression brake.

INTEGRATED CAT TECHNOLOGIES

  • Access information anytime, anywhere with Vision Link®– use it to make informed decisions that boost productivity, lower costs, simplify maintenance, and improve safety and security on your jobsite.
  • Product Link™
    collects machine data that can be viewed online
    through web and mobile applications (optional attachment).
Equipment Info

NOTE

Standard and optional equipment may vary. Consult your Cat dealer for details.

ELECTRICAL

Alarm, backup

OPERATOR ENVIRONMENT

Air Conditioner (includes heater and defroster)

POWER TRAIN

Tractor

OTHER STANDARD EQUIPMENT

Tractor