Cat Off-Highway Trucks 793 | Mining

Conditional Content 1

Conditional Content 2

Cat Mining Trucks are engineered for performance, designed for comfort and built to last. These powerful haul trucks are able to move more material at a lower cost.

(416) 667-5511 Request a Quote

Book a Demo

Explore my deals

Specifications

Body Hoists

Type

Twin two-stage hydraulic cylinders with snubbing valve.
Pump Flow - High Idle

216 gal/min 819 l/min
Relief Valve Setting - Raise

2955 psi 20370 kPa
Body Raise Time - High Idle

22 s 22 s
Body Lower Time - Float

23 s 23 s
Body Power Down - High Idle

21 s 21 s

Braking System

Service Brakes

Four-Corner Wet Disc Oil Cooled Hydraulically Actuated
Front Wet Disc Brake Surface Area

13907 in² 89727 cm²
Rear - Wet Disc Brake Surface Area

20861 in² 134590 cm²
Standards

(Service and Secondary) ISO 3450:2011
Parking Brake

Four-corner Multi-disc Spring applied Hydraulically Released

Cab

Air Conditioning

(HFC - 134A refrigerant) 9.3 kW 31733 BTU/hr
Heater / Defroster

36510 Btu/h 11 kW
ROPS Standards (2)

ROPS (Rollover Protective Structure) meets ISO 3471:2008 for Operator and ISO 13459:2012 for Trainer
FOPS Standards

FOPS (Falling Objects Protective Structure) meets ISO 3449:2005 Level II for Operator and ISO 13459:2012 Level II for Trainer
Note

Ambient capabilities down to -30C (-22F) for heater/defroster and up to 50C (122F) for air conditioning.

Capacity - HP Body - 100% Fill Factor

Struck

112.6-151 m3 (147-197.5 yd3)
Heaped (SAE 2:1)*

162-190 m3 (212-249 yd3)
Note (1)

Consult your local Cat dealer for body recommendations

Engine

Gross Power - SAE J1995:2014

2650 hp 1976 kW
Engine Model

Cat® C175-16
Net Power - SAE J1349:2011

2529 hp 1886 kW
Rated Speed

1750 r/min 1750 r/min
Emissions Rating

Fuel Optimized
Bore

7 in 175 mm
Stroke

9 in 220 mm
Displacement

5187 in³ 85 l
Note (1)

Net Power advertised is the power available at the flywheel when the engine is equipped with air intake system exhaust system and alternator.
Note (3)

U.S. EPA Tier 4 Final / EU Stage V available for applicable markets.

Final Drives

Note

Double reduction planetary with full floating axles.
Differential Ratio

1.8:1
Planetary Ratio

1
Total Reduction Ratio

29

Service Refill Capacities

Fuel Tank - Optional

1300 gal (US) 4922 l
Fuel Tank

750 gal (US) 2839 l
Diesel Exhaust Fluid Tank

62 gal (US) 235 l
Cooling System

284 gal (US) 1074 l
Crankcase

82 gal (US) 312 l
Front Wheels - Each

8 gal (US) 30 l
Differential - Final Drives

260 gal (US) 984 l
Steering System - Includes Tank

77 gal (US) 290 l
Brake Hoist System - Includes Tank

347 gal (US) 1315 l
Torque Converter/Transmission System - Including Sump

55 gal (US) 209 l
Torque Converter Sump

27 gal (US) 102 l

Sound

Sound Standards (1)

The operator sound pressure level 74 dB(A) complies with ISO 6394 and ISO 6396.

Steering

Steer Angle

36 ° 36 °
Turning Diameter - Front

93 ft 28 m
Steering Standards

ISO 5010:2019

Suspension

Type

Self-contained nitrogen/oil cylinders pin-to-pin mounting top and bottom double shear clevis attachments
Effective Cylinder Stroke - Front

12 in 317 mm
Effective Cylinder Stroke - Rear

7 in 165 mm
Rear axle - Oscillation

4.9 degrees

Tires

Standard Tires

737 mm (29 in)
Optional Tires

813 mm (32 in)
Tires

40.00 R57 46/90 R57 50/80 R57
Note (1)

Quick Change Rims optional
Note

Extended life wheel stations optional.
Note (2)

Caterpillar recommends the customer evaluate all job conditions and consult tire manufacturer for proper tire selection and TKPH (TMPH) capabilities.

Transmission

Forward - 1

8 mile/h 12 km/h
Forward - 2

10 mile/h 16 km/h
Forward - 3

14 mile/h 22 km/h
Forward - 4

19 mile/h 30 km/h
Forward - 5

26 mile/h 41 km/h
Forward - 6

37 mile/h 60 km/h
Reverse

7 mile/h 11 km/h
Top Speed - Loaded

37 mile/h 60 km/h

Weight Distributions - Approximate

Front Axle - Empty

51%
Rear Axle - Empty

49%
Front Axle - Loaded

33%
Rear Axle - Loaded

67%

Weights - Approximate

Nominal Rated Payload

265 ton (US) 240 t
Rated Gross Machine Weight

890668 lb 404000 kg
Chassis Weight

295098 lb 133854 kg
Body Weight

66471 lb 30151 kg
Note (1)

Consult your tire manufacturer for maximum tire load
Note (2)

Chassis weight with full fuel and fluids standard and mandatory attachments hoist body mounting group rims and tires.

Benefits

PRODUCTIVITY

The 793 is faster than competitive trucks and delivers optimal speed on steep grades, poor underfoot conditions and haul roads with high rolling resistance. More continuous torque and rimpull delivers more power to the ground and makes it possible to use a higher gear on grade.
Forward momentum and torque are maintained through each shift, with optimum gear selection resulting in faster acceleration.
The Cat six-speed transmission, with the latest Advanced Power Electronic Control Strategy (APECS) controls, is paired with the C175-16 engine to deliver optimum power over a wide range of operating speeds.
An empty weight advantage of 13-19 tonnes (14-21 tons) over competitive electric drive trucks in its size class ensures you’re getting the full payload you expect.
Features such as Enhanced Traction Control, Dynamic Stability Control (DSC), Anti-lock Brake System (ABS), Machine Speed Limiting and Cruise Control improve machine responsiveness and controllability while improving cycle times.

SAFETY

Access and egress are improved by wide walkways, ladders, catwalks and service platforms; slip-resistant surfaces and guard rails; plus a wide secondary egress ladder and a rear service access ladder.
Superior control is delivered by a patented braking system that provides immediate, fade-resistant braking and retarding.
A 360 Surround View camera system gives the operator greater visibility to the ground around the truck. In addition, the standard Cat MineStar™ Detect Object Detection system combines radar and camera systems to warn operators about hazards within the immediate vicinity.
The optional Driver Safety System alerts the operator if fatigue or distraction are detected.
The cab can be equipped with High Efficiency Particulate Air (HEPA) filters to cut respirable dust penetration by 96% — reducing operator exposure to potentially hazardous substances.

OPERATOR COMFORT

The cab provides 34% more operator space than D-Series models. It’s 17% wider, offers 11% more legroom and 19% more shoulder room.
The cab is quieter and offers automated temperature control and cab filtration for a safer and more comfortable environment.
Controls, levers and switches are positioned for ease of use.
A walkthrough cab with fully adjustable center console, easy-to-adjust seat and increased leg room makes the cab ideal for operators of all sizes.
The next generation seat is four-point-restraint ready and incorporates features like thigh tilt and extensions, 30% recline, air adjustable side and lumbar bolsters, and heated and cooled cushions.

OPERATOR EFFICIENCY & PRODUCTIVITY

The optional Auto Hoist feature automatically raises the body and controls engine speed, minimizing cycle times.
Speed coaching gives operators real-time feedback on how to operate the truck to maximize its productivity, and advanced speed controls allow the operator to quickly and easily set a desired machine speed and control it on-the-fly.
The payload monitoring system comes with more accurate measurements, improved monitoring and an improved interface.
Operator identification provides seamless integration of operator preference, with custom settings stored and restored to the saved settings upon log-in.
Faster data transfers and higher resolution displays improve access to information. Machine data, controls and guidance information are consolidated onto two 10-inch screens.

SERVICEABILITY

The new modular HVAC system consolidates components so the entire system can be removed and replaced quickly.
A modular radiator reduces engine removal and installation time and enables rebuilds to be completed off the truck.
New remote flash and remote troubleshooting capabilities reduce machine downtime due to software up to 50%.
Time spent on regular maintenance procedures is reduced thanks to features such as extended service intervals; grouped ground-level maintenance and checkpoints; easy access to major components; the standard AutoLube system; and service platforms on the engine and transmission.
A 100% airless electric start option eliminates air system maintenance from the machine and improves uptime.

DURABILITY AND LONG LIFE

The 793 has been improved with longer-life components, extended service intervals and easier maintenance to deliver mechanical availability that is consistently greater than 90%.
The 793 is built on the durable 240-tonne (266-ton) frame, backed by unprecedented levels of virtual and in-iron validation.
A mild steel frame provides flexibility, durability and resistance to impact loads. Castings are used in high-stress areas and the integral 4-post ROPS cab provides increased strength.
Component life is enhanced thanks to the standard rear-axle continuous filtration feature. Cleaner oil helps promote longer lubrication that leads to longer life.
The frame, powertrain, engine and components are built to be rebuilt — delivering multiple lives of like-new performance at a fraction-of-new price.

CAT BODIES

Cat bodies are the best choice for the 793. They’re designed to be an integral part of the entire vehicle system, ensuring you achieve maximum chassis life.
The Max Payload (MP) body is a lightweight, bolster-less design utilizing formed base plates in place of traditional structural members. It employs a convex canopy and a strong perimeter reinforcement in the top rail and rear rib.
The High Performance (HP) body features a lightweight, simplified and durable design that provides complete front machine coverage and extended overhead protection.
The 793 can be configured with our traditional body options, which are also specifically designed to work with the Cat frame for superior structural performance.

SUSTAINABILITY

The 793 is designed to use less fuel, which reduces engine emissions, and there is zero fuel burn during retarding. The optional Tier 4 Final engine reduces NOx and particulate matter.
Features like rear axle filtration, extended life filters and longer maintenance intervals decrease the amount of waste contributed to the environment.
Features such as the Centrifugal Oil Filter (COF) and Self-Cleaning Filter (SCF), combined with S•O•S Services, maximize the life of engine oil and minimize environmental impact.
The 793 engine is compatible with diesel fuel blended with lower-carbon intensity fuels such as biofuels and renewable fuels.
By rebuilding machines and components, the Cat Rebuild and Cat Reman programs preserve raw materials, conserve energy and reduce emissions.

BETTER ACCESS TO DATA

Next generation connectivity delivers faster data transfers, better access to data, consistent data communication, more actionable data, improved data analytics and new diagnostic capabilities.
The backbone of the next generation machine is 100 Mbps two-wire ethernet communication across the machine controllers, sensors that are optimized for data analytics, and robust controls.
Every machine from the factory comes standard with Product Link™ cellular connectivity as well as an option to communicate through dual-mode cellular 4G/LTE and satellite, or local Wi-Fi networks.
Product Link Elite next generation hardware enables the truck to collect and transmit information into locally-hosted or cloud-hosted applications. The hardware delivers fast processing with enhanced onboard memory and storage capability.

TECHNOLOGY SOLUTIONS

Designed for future updates, the 793 features an expandable platform and architecture and leaves the factory ready for full integration of standard and optional technologies.
MineStar Fleet is a fleet monitoring system that can be used to measure, manage and maximize the overall hauling operation.
MineStar Command for hauling, an autonomous hauling solution proven to increase productivity up to 30%, is a fully integrated factory offering.
Machine health solutions such as Equipment Care Advisor, Health Equipment Insights and Health Office enable a proactive approach to maintenance.

Equipment Info

ELECTRICAL

Alarm, Back-up

OPERATOR ENVIRONMENT

Modular hydraulic powered HVAC with automatic temperature control

POWER TRAIN

Cat C175-16 Engine
– Air Cleaner with Precleaner (4)
– Air-to-Air Aftercooler (ATAAC)
– Automatic Starter Protection
– Multi-Point Oil Pressure Sensing
– Self cleaning oil filter
– Turbocharging (4)/Aftercooled
– Centrifugal oil filter

TRANSMISSION

– 6-speed, Automatic Powershift with APECS controls
– Body-up Reverse Neutralizer
– Body-up Shift Inhibitor
– Controlled Throttle Shifting Directional Shift Management
– Downshift/Reverse Shift Inhibitor
– Lock-up Torque Converter
– Neutral Coast Inhibitor
– Neutral Start Switch
– Programmable Top Speed
– Pre-lubrication/Engine
– Rear Axle Continuous Lubrication/Filtration

OTHER STANDARD EQUIPMENT

Auto Lubrication System, Auto Shutoff

ANTIFREEZE

Mesabi flexible core radiator

Product Brochures

Product Brochure #1

Product Brochure #2

Product Brochure #3

Product Brochure #4