AD60 | Toromont Cat

Request a Quote (416) 667-5511

Product Brochures

Product Brochure #1

Specifications

Body Capacities

Dump Body - 1 - Standard

35.2 yd³ 26.9 m³
Dump Body - 2

42.6 yd³ 32.6 m³
Dump Body - 3

44.2 yd³ 33.8 m³
Dump Body - 4

47.9 yd³ 36.6 m³
Ejector Body - 1

35.2 yd³ 26.9 m³
Ejector Body - 2

38.5 yd³ 29.4 m³
Note

Heaped SAE 2:1.

Body Hoist

Raise

12 s 12 s
Lower

24 s 24 s
Total Cycle Time

36 s 36 s

Engine

Engine Model

Cat® C27
Gross Power - SAE J1995

805 hp 600 kW
Gross Power - VR Engine - SAE J1995

805 hp 600 kW
Bore

5.4 in 137.2 mm
Stroke

6 in 152.4 mm
Displacement

1648 in² 27 l
Note (1)

Power ratings apply at a rated speed of 2,000 rpm when tested under the reference conditions for the specified standard.
Note (2)

Ratings based on SAE J1995 standard air conditions of 25° C (77° F) and 100 kPa (29.61 Hg) barometer. Power based on fuel having API gravity of 35 at 16° C (60° F) and an LHV of 42 780 kJ/kg (18,390 BTU/lb) when engine used at 30° C (86° F).
Note (3)

Engine derate will commence at an altitude of 557 m (1,827 ft).
Note (4)

Emissions are equivalent to U.S. EPA Tier 2/EU Stage II.
Rated Power

2000 r/min 2000 r/min

Final Drives

Differential Ratio

3.46:1
Final Drive Ratio

5.5:1
Total Reduction Ratio

19.04:1

Operating Specifications

Nominal Payload Capacity

132277 lb 60000 kg
Body Capacities

26.9-36.6 m³ (35.2-47.9 yd³)
Gross Machine Operating Mass

246917 lb 112000 kg

Service Refill Capacities

Engine Crankcase - With Filter

26.2 gal (US) 99 l
Transmission

14 gal (US) 53 l
Hydraulic Tank

68.2 gal (US) 258 l
Cooling System

36.5 gal (US) 138 l
Front Differential and Final Drives

36.5 gal (US) 138 l
Rear Differential and Final Drives

36.5 gal (US) 138 l
Fuel Tank

226.1 gal (US) 856 l

Standards

Standards

ROPS/FOPS Certified Cab

Tires

Tire Size

35 × 65 R33

Transmission

Forward - 1

3.7 mile/h 6 km/h
Forward - 2

5.6 mile/h 9 km/h
Forward - 3

7.8 mile/h 12.5 km/h
Forward - 4

10.6 mile/h 17 km/h
Forward - 5

14.3 mile/h 23 km/h
Forward - 6

19.9 mile/h 32 km/h
Forward - 7

26.4 mile/h 42.5 km/h
Reverse - 1

4.3 mile/h 7 km/h
Note

Maximum travel speeds with standard 35 × 65 R33 tires.

Turning Dimensions

Outside Clearance Radius

393.9 in 10005 mm
Inside Turn Radius

218.1 in 5540 mm
Frame Oscillation

10°
Articulation Angle

42.5 ° 42.5 °

Weight Distribution

Empty - Front Axle

70.50%
Empty - Rear Axle

29.50%
Loaded - Front Axle

50.00%
Loaded - Rear Axle

50.00%

Weights

Empty

112876 lb 51200 kg
Empty - Front Axle

79578 lb 36096 kg
Empty - Rear Axle

33298 lb 15104 kg
Loaded

246917 lb 112000 kg
Loaded - Front Axle

123459 lb 56000 kg
Loaded - Rear Axle

123459 lb 56000 kg

Benefits

Cat C27 Engine

The Cat C27 Ventilation Reduction (VR) engine achieves emissions equivalent to U.S. EPA Tier 2 and EU Stage ll. It delivers higher power and greater durability for maximum hauling performance in the most demanding mining applications. Complete system integration of the engine and transmission optimizes performance and efficiency.

Power Increase

The 21.8 percent power increase over previous models provides unequalled lugging force during acceleration and less down-shifting on grade. Improved software and updates in engine technology further improve transmission shifting and decrease fuel consumption.

Watercooled Turbocharged and ATAAC

Air-to-air aftercooling provides improved fuel economy by packing cooler, denser air into cylinders for more complete combustion of fuel and lower emissions.

Electronic Unit Injection (EUI)

The electronically controlled unit injection fuel system senses operating conditions and regulates fuel delivery for optimum fuel efficiency. The proven high-pressure fuel system provides improved response times and more efficient fuel burn with lower emissions and less smoke.

Electronic Control Module (ECM)

ECM utilizes advanced engine management software to monitor, control and protect the engine utilizing self-diagnosing electronic sensors. The computerized system senses operating conditions and power requirements and adjusts engine for peak performance and most efficient operation at all times.

Design

Caterpillar designed one-piece cast iron block provides maximum strength and durability. Two-piece articulated pistons with forged steel crowns are designed to withstand higher cylinder pressure.

Mechanical Power Train

The Cat mechanical drive power train and power shift transmission provide unmatched operating efficiency and control on steep grades, in poor underfoot conditions, and on haul roads and drives with high rolling resistance.

Transmission

The Cat seven-speed planetary power shift transmission is matched with the direct-injection C27 engine to deliver constant power over a wide range of operating speeds. Individual clutch modulation provides smooth clutch engagements to optimize performance and extend clutch life.

Lock-Up Torque Converter

Combines maximum rimpull and cushioned shifting of torque converter drive with the efficiency and performance of direct drive. When engaged, lock-up provides superior power train efficiency by delivering more power to the wheels.

Lock-Up Clutch

Quickly releases and re-engages to reduce power train torque loads for smoother shifting, long life and a more comfortable ride.

Remote Transmission Oil Cooler

Increases cooling capacity in the transmission oil circuit to ensure optimal performance on long, uphill loaded hauls.

Cat Data Link

Electronically integrates machine computer systems to optimize overall power train performance, increase reliability and component life, and reduce operating costs.

Controlled Throttle Shifting - Regulates engine RPM, torque converter lock-up and transmission clutch engagement for smoother shifts and longer component life.
Economy Shift Mode - Decreases fuel consumption, lowers noise levels and potentially longer engine life.
Directional Shift Management - Regulates engine speed to prevent damage caused by high speed directional changes.
Body-up Shift Inhibitor - Prevents the transmission from shifting above a pre-programmed gear without the body fully lowered.

Electronic Technician (Cat ET)

Cat ET service tool provides service technicians with easy access to stored diagnostic data through Cat Data Link to simplify problem diagnosis and increase availability.

Overspeed Protection

The Automatic Retarder Control (ARC) system provides engine overspeed protection. The ARC will engage the brakes if the following conditions exist at the same time:

An unsafe engine speed is reached.
The ARC on/off switch is in the ON position or the OFF position.
The throttle is being depressed by the operator. If the transmission is in top gear, the lockup clutch is deactivated in order to protect the engine against an engine overspeed condition.

Integrated Braking System

The Cat oil-cooled braking system delivers reliable performance and control in the most extreme underground mining conditions. The integrated system combines the service, secondary, parking brake and retarding functions in the same robust system for optimum braking efficiency.

Oil-Cooled Multiple Disc Brakes

Four-wheel, forced oil-cooled, multiple disc service brakes are continuously cooled by a water-to-oil heat exchangers for non-fade braking and retarding performance. They are also completely enclosed to prevent contamination and reduce maintenance.

Automatic Retarder Control (ARC)

Electronically controls retarding on grade to maintain optimum engine RPM and oil cooling. Additional braking may be applied using the manual retarder or the brake pedal. ARC also allows the operator to maintain optimum engine speeds for faster downhill hauls and greater productivity. The ARC automatically activates when engine speed exceeds factory preset levels.

Superior Control

Automatic brake modulation offers a smoother ride and greater control, allowing the operator to concentrate on driving.

The AD60 operator station is ergonomically designed for total machine control in a comfortable, productive and safe environment. All controls, levers, switches and gauges are positioned to maximize productivity and minimize operator fatigue.

Protective Structure

Integral to the cab and frame, both the Rollover Protective Structure (ROPS) and Falling Objects Protective Structure (FOPS) are resiliently mounted to the mainframe to isolate the operator from vibration for a more comfortable ride.

Standard Enclosed Cab

Standard sound-suppressed ROPS cab provides a quiet, secure and comfortable air-conditioned working environment with fresh, pressurized, temperature-controlled air circulation.

Cat Comfort Air Suspension Seat

Ergonomic, fully adjustable suspension seat provides optimal operator comfort. Designed to minimize vertical and lateral motion of the operator. Thick cushions reduce pressure on lower back and thighs. Wide, retractable seat belts provide a secure, comfortable restraint.

Steering Column

Comfort wheel with tilt steering provides a comfortable driving position, secure grip and greater control.

Monitoring System

Cat Electronic Monitoring System (Cat EMS) continuously provides critical machine data to keep the machine performing at top production levels. Displays are backlit for easy viewing.

Body Design

Cat truck bodies are designed for optimal strength, capacity, durability and low cost per ton.

Cat Truck Bodies

Caterpillar has two body styles to meet your application:

Dump Body
Ejector Body

The ejector body offers clean load ejection and can be removed and switched with a dump body for greater machine versatility.

Body Selection

Selection of the right body depends on material, haul road, and dump conditions. The better the match of body to application, the greater the efficiency. Its diverging flow design gives clean load ejection, which maximizes production and avoids material carryback.

Body/Chassis Integration

Cat truck bodies are designed and matched with the integrated chassis system for optimum structural reliability, durability and long life.

Fast Hoist Cycle Times

Single-stage hoist cylinders provide fast dump cycle times of 12 seconds for raise and 24 seconds for lower.

Truck Payload Management System (TPMS)

The optional TPMS system calculates the payload the truck is carrying and determines truck cycle times.

Frame Design

The frame uses box-section design with stiff frame beams to resist twisting forces giving it a longer structural life.

Articulating/Oscillating Hitch

This system provides steering and oscillation and enables the truck to maintain all wheel ground contact in rough terrain.

Ground-Level Service Access

Easy access to daily service points allows convenient servicing to tanks, filters, lubrication points, compartment drains and sight gauges for quick fluid level checks. Electric fuel priming capability and remote mounted fuel filters to save time during maintenance operations.

Diagnostics - Cat Electronic Technician

Electronic control system enables quick diagnosis of engine conditions and effective maintenance and repairs utilizing the Cat ET Service Tool.

Scheduled Oil Sampling

S·O·SSM helps avoid minor repairs becoming major ones. Sample point adaptors fitted standard to machine.

Sight Gauges

Makes fluid level checks quick and easy. These include the hydraulic, transmission and coolant reservoirs.

Dealer Capability

Cat dealers will provide the level of support you need, on a global scale. Dealer expert technicians have the knowledge, experience, training and tooling to handle your repair and maintenance needs. They offer 24/7 product support via a worldwide network of reliable and prompt parts distribution facilities, dealer service centers, and technical training facilities to keep your equipment up and running.

Service Support

Cat equipment is designed and built to provide maximum productivity and operating economy throughout its working life. Cat dealers offer a wide range of service plans that will maximize return on your investment, including:

Preventive Maintenance Programs
Diagnostic Programs, such as Scheduled Oil Sampling and Technical Analysis
Rebuild and Reman Options
Customer Support Agreements

Technology Products

Cat dealers offer a range of advanced technology products designed to improve efficiency, productivity and lower costs. The standard VIMS™ Gen 3 system enables your equipment to provide detailed data about its own health and working conditions by monitoring key temperatures, pressures, and more.

Operator Training

Your Cat dealer can arrange operator training to improve productivity, decrease downtime, reduce operating costs and enhance safety.

Product Safety

Equipment Info

ELECTRICAL

12V Power Supply In Cab

OPERATOR ENVIRONMENT

Cat Electronic Monitoring System (Cat EMS)

POWER TRAIN

Cat C27 ATAAC Diesel Engine, 12 Cylinder

OTHER STANDARD EQUIPMENT

Body, Dump (26.9 m³/35.2 yd³)

360 view

Request a Quote