623 | Toromont Cat

Request a Quote (416) 667-5511

Product Brochures

Product Brochure #1

Product Brochure #2

Specifications

Cab

Exterior Sound Level

The exterior sound power level for the standard machine (ISO 6395:2008) is 114 dB(A).
ROPS/FOPS

Meets ISO standards

Dimensions

Height - Overall Shipping

158.9 in 4037 mm
Length - Overall Machine

542 in 13767 mm
Axle to Vertical Hitch Pin

17 in 432 mm
Width - Overall Machine

141.1 in 3585 mm
Width - Overall Machine - Ladder Down

149.2 in 3790 mm
Height - Top of Cab

142.6 in 3621 mm
Height - Scraper Blade Maximum

20.5 in 520 mm
Width - Tractor

133.1 in 3381 mm
Width - Inside of Bowl

120 in 3048 mm
Width - Outside Rear Tires

128.9 in 3275 mm
Front of Tractor to Front Axle

122.8 in 3119 mm
Wheel Base

329.5 in 8370 mm
Rear Axle - Rear of Machine

89.7 in 2278 mm
Ground Clearance - Tractor

21.9 in 557 mm
Width - Rear Tire Centers

90.2 in 2290 mm
Height - Top of Elevator

148.3 in 3768 mm

Engine

Flywheel Power - Tractor/Scraper

304 kW (407 hp)
Engine Model

Cat® C13
Rated Engine RPM

2000 r/min 2000 r/min
Flywheel Power - Tractor

407 hp 304 kW
Note

Meets U.S. EPA Tier 4 Final and EU Stage V emission standards, or equivalent to U.S. EPA Tier 2, or equivalent to U.S. EPA Tier 3 and EU Stage IIIA.

General

Top Speed - Loaded

33.5 mile/h 53.9 km/h
Overall Width

11.8 ft 3.57 m
Overall Shipping Height

12.37 ft 3.77 m
Scraper Capacity - Heaped

23 yd³ 17.6 m³
Scraper Capacity - Struck

18.8 yd³ 14.4 m³
Rated Load

25 038 kg (55,200 lb); 25.1 tonnes (27.6 tons)
Width - Cut

10.4 ft 3.14 m
Maximum Depth of Cut

10.3 in 262 mm
Maximum Depth of Spread

18.3 in 465 mm
180° Curb-to-Curb Turning Width

38.71 ft 11.8 m
Tires - Tractor Drive

33.25R29**E3
Tires - Scraper

33.25R29**E3
Number of Flights

15
Maximum Floor Opening

4.4 ft 1.34 m
Overall Length

45.18 ft 13.77 m
Elevator Flight Spacing

20 in 520 mm

Implement Cycle Times

Ejector Extend

6.5 s 6.5 s
Ejector Retract

9.7 s 9.7 s
Bowl Lower

3.5 s 3.5 s
Bowl Raise

3 s 3 s

Safety Criteria Compliance Standards

Steering System

ISO 5010:2007
Rollover Protection Structure (ROPS)

ISO 3471:2008 for up to 17 084 kg (37,664 lb)
Falling Object Protective Structure (FOPS)

ISO 3449:2005 Level II
Reverse Alarm

ISO 9533:2010
Brakes

ISO 3450:2011
Seat Belt

SAE J386:JUN1985

Scraper Bowl

Scraper Capacity - Heaped

23 yd³ 17.6 m³

Service Refill Capacities

Final Drive - Each

5 gal (US) 19 l
Crankcase

9.7 gal (US) 37 l
Transmission System

25.5 gal (US) 97 l
Fuel Tank

216.09 gal (US) 818 l
Hydraulic System

21.926 gal (US) 83 l

Service Refill Capacities - Tractor

Differential

41.7 gal (US) 158 l

Transmission

Top Speed - Loaded

33.5 mile/h 53.9 km/h

Travel Speeds - Runout

Transmission Gear - First

3.1 mile/h 5 km/h
Transmission Gear - Second

5.5 mile/h 8.9 km/h
Transmission Gear - Third

7.5 mile/h 12.1 km/h
Transmission Gear - Fourth

10.1 mile/h 16.3 km/h
Transmission Gear - Fifth

13.6 mile/h 21.9 km/h
Transmission Gear - Sixth

18.4 mile/h 29.6 km/h
Transmission Gear - Seventh

24.8 mile/h 39.9 km/h
Transmission Gear - Eighth

33.5 mile/h 53.9 km/h
Transmission Gear - Reverse

5.7 mile/h 9.2 km/h

Benefits

BE MORE PRODUCTIVE

Additional elevator torque.
Improvement in chain life.
Enhanced elevator drive sprocket for reduced chain wear.Improved scissor-style chain tension system for decreased sprocket wear, chain wear, and chain jumping.
Cat C13 engine offers increased power density with a combination of proven electronic, fuel, and air systems.
Use Ground Speed Control to set the desired top speed, and the machine will find the gear that works best for the engine and the transmission, providing a lower fuel burn.
The Machine Speed Limit feature replaces Top Gear Selection.
Advanced Productivity Electronic Control System (APECS) allows the engine and transmission to communicate on a high level. This communication allows the machine to better utilize the power and torque the engine is producing. The net result is moving more material.
Auto-Stall assists in quickly bringing the transmission to an operating temperature at start-up when the machine is working in a cold climate region.
Cat Payload for scrapers is an earthmoving solution for optimal payload and job site efficiency. Cat Payload achieves on-the-go weighing by using bowl lift cylinder pressure during the loaded haul segment. Cat Payload is optimized to be used with Sequence Assist, which provides increased productivity with less operator effort.

WORK IN COMFORT

Reduce up to 14 individual operator commands per cycle with
Sequence Assist (optional attachment).
Steer with less effort using the newly designed high-pressure steering
system.
Enjoy interior improvements and a more ergonomic work environment
with a 21% larger cab than the G Series cab.
Intuitive, ergonomic controls keep operators focused on their work.
Maintain desired cab temperature with automatic temperature control
.

DESIGNED FOR SAFETY

Enhance an operator’s awareness of site surroundings with the optional
Work Area Vision System (WAVS).
The seatbelt indicator provides both visual and audible alerts when the seat
belt is not in use.
Ground-level, engine shut-off switch stops all fuel to the engine when
activated and shuts down the machine.
Advanced Cushion Hitch allows the cushion hitch to prevent
end stroke by having the ability to predict end stroke events
and manage the rate of dampening, resulting in reduced hitch maintenance
and improved operator ride in rough conditions.

EASY TO OPERATE

The spacious cab features easy, intuitive controls and excellent
visibility. The cab provides a comfortable working environment for
all-day operation.
Cat Advanced Ride Management (ARM) seat suspension reduces
end stroke movement of the load cylinder for a smoother ride.
Engine overspeed protection will automatically engage with no
operator input when the machine is in eighth gear. The machine
will assist in slowing the machine speed by canceling the throttle
command and engaging the engine compression brake.

INTEGRATED CAT TECHNOLOGIES

Monitor, manage, and enhance job site operations.
Hit target grade faster and more accurately with Cat GRADE technologies. Finish jobs in fewer passes and with less operator effort, saving you time and helping to increase profit.
Product Link™ collects machine data that can be viewed online through web and mobile applications (optional attachment).
Access information anytime, anywhere with Vision Link®– use it to make informed decisions that boost productivity, lower costs, simplify maintenance, and improve safety and security on your job site.
Shorten the learning curve for inexperienced operators with Sequence Assist and Load Assist (included with Cat Grade
attachment).

EXECUTE EFFICIENCY

The tractor hydraulic on-demand fan helps assist in lower fuel consumption.
The Cat C13 tractor engine and C9.3 scraper engine meet U.S. EPA
Tier 4 Final and EU Stage V emission standards, or equivalent to
U.S. EPA Tier 2, or equivalent to U.S. EPA Tier 3 and EU Stage IIIA.
Cat Grade Control (optional attachment) intelligently ensures the machine does not cut below grade in a cut area or overfill in the fill area.

Equipment Info

NOTE

Standard and optional equipment may vary. Consult your Cat dealer for details.

OPERATOR ENVIRONMENT - TRACTOR

HVAC system, heat, AC, defrost

KEYPAD SWITCHES

Information mode on Messenger Display

SAFETY TAB ROCKER SWITCHES

Parking Brake

GAUGES, WARNINGS INCLUDE:

Coolant temperature

FLUIDS

Extended Life Coolant to -37� C (-34� F)

OTHER STANDARD EQUIPMENT - TRACTOR

Advanced cushion hitch

BOWL

17.6 m³ (23 yd³), heaped

OTHER STANDARD EQUIPMENT - SCRAPER

Vandalism locks

INTEGRATED TECHNOLOGIES

Sequence Assist, Cat Payload

POWER TRAIN - TRACTOR

Cat C13

BRAKING SYSTEM

Primary and secondary, wet disc, hydraulic

TRANSMISSION

Programmable top gear selection

ELECTRICAL - TRACTOR

Alternator, 150 Amp

LIGHTING SYSTEM - TRACTOR

Headlights, halogen

ELECTRICAL - SCRAPER

Alarm, backup

LIGHTING SYSTEM - SCRAPER

Trun signals with hazard function, LED

360 view

Product videos

Request a Quote