Conditional Content 1
Conditional Content 2
621
621
The Open Bowl Wheel Tractor-Scraper is available as a self-loading, push loaded or push loaded hauling system with a broad material appetite.
Book a Demo
Explore my deals
Specifications
Cab
-
Exterior Sound LevelThe exterior sound power level for the standard machine (ISO 6393:2008) is 118 dB(A).
-
ROPS/FOPSMeets SAE and ISO standards
Dimensions
-
Width - Overall Machine141.1 in 3585 mm
-
Width - Tractor133.1 in 3381 mm
-
Width - Inside of Bowl120 in 3048 mm
-
Width - Outside Rear Tires128.9 in 3275 mm
-
Height - Overall Shipping158.6 in 4029 mm
-
Height - Top of Cab142.2 in 3612 mm
-
Ground Clearance - Tractor21.9 in 557 mm
-
Front of Tractor to Front Axle122.8 in 3119 mm
-
Axle to Vertical Hitch Pin21.3 in 540 mm
-
Height - Scraper Blade Maximum20.5 in 520 mm
-
Wheel Base314.9 in 7998 mm
-
Rear Axle - Rear of Machine114.1 in 2898 mm
-
Width - Overall Machine - Ladder Down149.2 in 3790 mm
-
Length - Overall Machine - Standard551.8 in 14015 mm
-
Length - Maximum (Push-Pull)613.2 in 15576 mm
-
Width - Rear Tire Centers90.2 in 2290 mm
Engine
-
NoteCat® C13 engine meets U.S. Environmental Protection Agency (EPA) Tier 4 Final/EU Stage IV engine emission standards.
-
Flywheel Power - Tractor407 hp 304 kW
-
Rated Engine RPM - Tractor2000 r/min 2000 r/min
-
Engine Model - TractorCat® C13
General
-
Maximum Depth of Cut12.4 in 315 mm
-
Fuel Tank Refill Capacity - Scraper216.1 gal (US) 818 l
-
180° Curb-to-Curb Turning Width38.71 ft 11.8 m
-
Scraper Capacity - Heaped24 yd³ 18.4 m³
-
Overall Width11.75 ft 3.58 m
-
Maximum Depth of Spread21.3 in 540 mm
-
Overall Shipping Height13.22 ft 4.03 m
-
Tires - Tractor Drive33.25R29**E3
-
Width - Cut10.3 ft 3.14 m
-
Scraper Capacity - Struck17.1 yd³ 13 m³
-
Top Speed - Loaded33.5 mile/h 53.9 km/h
-
Tires - Scraper33.25R29**E3
-
Rated Load26 127 kg (57,610 lb); 26.19 tonnes (28.81 tons)
Implement Cycle Times
-
Ejector Retract6.7 s 6.7 s
-
Bail Raise1.8 s 1.8 s
-
Apron Raise2.95 s 2.95 s
-
Apron Lower3.8 s 3.8 s
-
Ejector Extend5.2 s 5.2 s
-
Bowl Raise3 s 3 s
-
Bowl Lower3.5 s 3.5 s
-
Bail Lower3.2 s 3.2 s
Non Push-Pull
-
Overall Length45.9 ft 14.02 m
-
Operating Weight - Empty79787 lb 36185 kg
Push-Pull
-
Operating Weight - Empty80630 lb 36567 kg
-
Overall Length - With Bail Down51.1 ft 15.58 m
Safety Criteria Compliance Standards
-
Reverse AlarmISO 9533:2010
-
BrakesISO 3450:1996
-
Rollover Protection Structure (ROPS)ISO 3471:2008 for up to 17 084 kg (37,664 lb)
-
Falling Object Protective Structure (FOPS)ISO 3449:2005 Level II
-
Steering SystemISO 5010:2007
-
Seat BeltSAE J386:JUN1985
Scraper Bowl
-
Scraper Capacity - Heaped24 yd³ 18.4 m³
Service Refill Capacities
-
Fuel Tank216.09 gal (US) 818 l
-
Crankcase8.08 gal (US) 30.58 l
-
Hydraulic System21.926 gal (US) 83 l
-
Diesel Exhaust Fluid8.057 gal (US) 30.5 l
-
Cooling System11.89 gal (US) 45 l
-
Transmission System24.76 gal (US) 93 l
Tractor Engine
-
Flywheel Power - Tractor/Scraper304 kW (407 hp)
Transmission
-
Top Speed - Loaded33.5 mile/h 53.9 km/h
Travel Speeds - Runout
-
Transmission Gear - Eighth33.5 mile/h 53.9 km/h
-
Transmission Gear - Third7.5 mile/h 12.1 km/h
-
Transmission Gear - Fourth10.1 mile/h 16.3 km/h
-
Transmission Gear - First3.1 mile/h 5 km/h
-
Transmission Gear - Fifth13.6 mile/h 21.9 km/h
-
Transmission Gear - Reverse5.7 mile/h 9.2 km/h
-
Transmission Gear - Seventh24.8 mile/h 39.9 km/h
-
Transmission Gear - Sixth18.4 mile/h 29.6 km/h
-
Transmission Gear - Second5.5 mile/h 8.9 km/h
Benefits
BE MORE PRODUCTIVE
- Advanced Productivity Electronic Control System (APECS) allows the engine and transmission to communicate on a high level. This communication allows the machine to utilize better the power and torque the engine is producing. The net result is moving more material.
- Use Ground Speed Control to set the desired top speed and the machine will find the gear that works best for the engine and the transmission, providing a lower fuel burn.
- The Machine Speed Limit feature replaces Top Gear Selection.
- Auto-Stall assists in quickly bringing the transmission to an operating temperature at start-up when the machine is working in a cold climate region.
- Boost productivity with the Cat Payload feature (optional attachment). Cat Payload is an automatic feature when ordered with Sequence Assist.
- Cat Payload for scrapers is an earthmoving solution for optimal payload and job site efficiency. Cat Payload achieves on-the-go weighing by using bowl lift cylinder pressure during the loaded haul segment. Cat Payload is optimized to be used with Sequence Assist, which provides increased productivity with less operator effort.
WORK IN COMFORT
- Reduce up to 14 individual operator commands per cycle with Sequence Assist (optional attachment).
- Steer with less effort using the newly designed high-pressure
steering system. - Enjoy interior improvements and a more ergonomic work environment
with a 21% larger cab than the G Series cab. - Intuitive, ergonomic controls keep operators focused on their work.
- Maintain desired cab temperature with automatic temperature
control.
DESIGNED FOR SAFETY
- Enhance an operator’s awareness of site surroundings with the
Work Area Vision System (WAVS). - Seat belt indicator provides visual and audible alerts when the seat
belt is not in use. - Advanced Cushion Hitch allows the cushion hitch to prevent end
stroke by predicting endstroke events and managing the
rate of dampening, resulting in reduced hitch maintenance and improved
operator ride in rough conditions.
EASY TO OPERATE
- The spacious cab features easy, intuitive controls and excellent visibility
. The cab provides a comfortable working environment for all-day
operations. - Cat Advanced Ride Management (ARM) seat suspension reduces
endstroke movement of the load cylinder for a smoother ride. - Engine overspeed protection will automatically engage with no operator
input when the machine is in eighth gear. The machine will
assist in slowing the machine's speed by canceling the throttle command
and engaging the engine compression brake.
INTEGRATED CAT TECHNOLOGIES
- Monitor, manage, and enhance job site operations.
- Hit target grade faster and more accurately with Cat GRADE technologies. Finish jobs in fewer passes and with less operator effort, saving you time and helping to increase profit.
- Vision Link™ collects machine data that can be viewed online through web and mobile applications (optional attachment).
- Access information anytime, anywhere with Vision Link®– use it to make informed decisions that boost productivity, lower costs, simplify maintenance, and improve safety and security on your job site.
- Shorten the learning curve for inexperienced operators with Cat grade control and load assist. (optional attachment).
EXECUTE EFFICIENCY
- The new tractor hydraulic on-demand fan helps assist in lower fuel consumption.
- The Cat C13 tractor engine meets U.S. EPA Tier 4 Final or EU Stage V emission standards, contributing to lower fuel consumption.
- Using draft-arm overflow guards, diverts material away from the bowl, preventing material from getting caught between the draft arms and the bowl sides.
- Cat Grade Control (optional attachment) intelligently ensures the machine does not cut below grade in a cut area or overfill in the fill area.
Equipment Info
NOTE
Standard and optional equipment may vary. Consult your Cat dealer for details.
OTHER STANDARD EQUIPMENT - SCRAPER
Fender, scraper
POWER TRAIN - TRACTOR
Cat® C13 engine with MEUI™
INTEGRATED TECHNOLOGIES
Sequence Assist and Cat Payload Arrangement
POWER TRAIN - SCRAPER
Braking system: - Primary and secondary, wet disc, hydraulic
ELECTRICAL - TRACTOR
Alternator, 150 Amp
ELECTRICAL - SCRAPER
Alarm, backup
OPERATOR ENVIRONMENT - TRACTOR
Camera arrangement - WAVS
FLUIDS
Extended Life Coolant to -37° C (-34° F)
OTHER STANDARD EQUIPMENT - TRACTOR
Advanced cushion hitch
Product Brochures
